• Español
  • English
  • Português
Get Adobe Flash player

STRINGERS

(ZINC-PLATED STEEL)

DESCRIPTION

 

ESTANDAR

 

 

 

STANDARD MODEL:   or 600 mm panels. These are “U-shaped”, made of galvanized steel and are 1 mm thick.

The stringer is connected to the pedestal.

System: a clip-on or screw-in system is used.

The upper part has a strip of neoprene which supports the panel and dampens noise.

 

 

 

 


 

REFORZADO

 

REINFORCED MODEL: For special panel modules from 300 to 900 mm in galvanized steel, 1.5 mm thick, a square-shaped bar. The stringer is connected to the pedestal.

System: a screw-in system is used.
The upper part has a strip of neoprene which supports the panel and dampens noise. 

 

 


 

 

 

ESPECIAL

SPECIAL MODEL: For panels measuring 600 to 1200 mm. Recommended for heavy loads or bridging panels of galvanized steel with a thickness of between 2 and 3 mm. The stringer is connected to the pedestal.

System: a screw-in system is used.

The upper part has a strip of neoprene which supports the panel and dampens noise.

 

 


  • RECOMMENDATIONS
  •  
  • STANDARD RANGE or 30 mm versions and MID-RANGE for SD. 30 R or SD. 30 RC versions. Dipso recommends the stringers be used at all times regardless of the height at which they are installed.
    – For other ranges or versions, use stringers that exceed 26 cm.
    – This can also be incorporated as a complement to conductive installations.